After the centrifuge has been working for a period of time, there are often problems of one kind or another. Konishi has specially summarized some for your reference.
1. During the centrifuge separation process, the material will emit a strong pungent odor, which will seriously affect the working environment, what can be done to deal with it?
Answer: In the process of separation, we often encounter problems such as the production of a large amount of gas, or the gas has a strong pungent odor, or the gas is explosive and flammable, which are hidden dangers. Typically, we add an exhaust port to the centrifuge housing, so that safe gases can be discharged directly in an open way, and irritating or unsafe gases can be discharged directly outside the workplace through pipes to meet hygiene and safety requirements. However, when the amount of toxic gas exceeds the standard, we have to go through special treatment before discharge.
2. What is the effect of sedimentation centrifuge separation?
Answer: Compared with the filter centrifuge, the moisture content of the treated material is significantly increased, and the clarified liquid is relatively turbid, and sometimes it is necessary to carry out two or more cycles of separation to achieve higher separation requirements.
3. My material is fatty acid, what type of centrifuge should I use?
Answer: Fatty acids are viscous substances, and sedimentation centrifuges should be used for sedimentation centrifuge for viscous materials.
4. The material has been soaked in the corrosive solution and has strong corrosiveness, which material centrifuge should be used?
Answer: The materials of the centrifuge generally include carbon steel, stainless steel 304, 316, 316L, peptide material, plastic lining treatment, rubber lining treatment, etc. Generally, stainless steel materials should be used, and if you want to reduce costs, you can also choose plastic lining materials.

The two-stage piston pusher centrifuge produced by Xiangtan Bolun Centrifuge is suitable for separating solid concentrated suspensions containing granules or fibers, and can process acid and alkaline materials. The effect of the suspension on the centrifuge is threefold: temperature, solid-phase materiality, and concentration.

HR400 two-stage piston pusher centrifuge

The temperature of the suspension is generally less than 80 degrees, the salt solution is less than 60 degrees, and the corrosion resistance of the stainless steel material in contact with the material decreases with the increase of the suspension temperature, so the suspension temperature should not be too high.
THE TWO-STAGE PISTON PUSHER CENTRIFUGE PRODUCED BY XIANGTAN BOLUN CENTRIFUGE IS SUITABLE FOR THE DEHYDRATION OF THE COARSE-GRAINED AND EASY-TO-FILTER SUSPENSION OF SOLID PARTICLES IN THE RANGE OF 0.3-3MM, THE SOLID PARTICLES ARE TOO SMALL, AND THEY ARE EASY TO BE PUSHED OUT OF THE SIEVE HOLE, WHICH IS TAKEN AWAY BY THE FILTRATE, RESULTING IN THE CONSEQUENCES OF RUNNING THE MATERIAL, AND IF THE SCREEN GAP IS CHANGED, THE SOLID PARTICLES CAN BE SEPARATED FROM THE MATERIAL IN THE RANGE OF 0.1-0.3MM, BUT THE OUTPUT OF THE CENTRIFUGE WILL BE REDUCED
The two-stage piston pusher centrifuge produced by Xiangtan Bolun centrifuge requires a suspension with a concentration of 45-80%, and the concentration of salt solution should be greater than 55%, and various materials require different feed concentrations, under the premise of ensuring product quality and uniform distribution, the higher the feed concentration, the greater the output, the HR type centrifuge produced by the company has higher separation factors, and the concentration sensitivity of the suspension is not as large as the HY-800 centrifuge, but when the suspension is too thin, the filter residue has no time to dehydrate, The dilute suspension will wash away part of the dehydrated filter residue from the drum, forming "thinning" and "running material", and causing uneven distribution of materials in the drum, causing the drum to vibrate, and at the same time the power required increases significantly (mainly the main motor current increases), if the depth is too high, the material fluidity is poor, causing uneven distribution, and it will also cause the drum to vibrate strongly
HR400 two-stage piston pusher centrifuge

    Xiangtan Bolun centrifuge production centrifuge and centrifuge accessories, can provide most of the models of centrifuge accessories and can be used together, you have centrifuge needs, welcome you to inquire:
Hotline: Mr. 13907325292 Li (same number on WeChat)